Dodge Truck AR15 Mount Kit — 2019 & Newer — the complete ARmA15 locking mount plus vehicle-specific under-seat hardware and support bar. Heavy-duty 3/16-inch steel, discreet rifle storage, and quick access for compatible AR-15, M4, and M16 rifles.
Fitment: Dodge trucks — 2019 and newer. Choose the kit for your truck’s model year; the other year group is a separate product. Wall hardware sold separately. Lock not included.
Want to mount it on a wall, too?
Wall hardware is optional and sold separately. Add the Wall Mount Hardware Kit: 2 lag bolts and a Torx driver bit.
The Dodge AR15 truck mount 2019 and newer combines the American-built ARmA15 locking mount with the hardware and support bar for mounting beneath the rear folding seat. Keep your compatible rifle discreetly under the rear seat while preserving clearance for normal seat movement.
🚙 Choose the Correct Vehicle Kit
Dodge trucks — 2019 and newer. This is the 2019-and-newer hardware package. For a 2018 or earlier truck, choose the other Dodge kit from our other Dodge year-group product page. The kit bolts to the bottom of the rear folding seat.
Check seat frame/tube placement, seat movement, floor hump, storage bins, subwoofers, jack location, wiring, and rifle/optic clearance. If your configuration is unusual or you are unsure, send us your year, make, and model before ordering.
🔧 What’s Included
1× ARmA15 locking mount.
1× Dodge under-seat hardware kit with a flat steel support bar.
Rivnut hardware and Rivnut installation tool.
2× bolts and 2× lock washers to attach the ARmA15 to the support bar.
4× flange bolts and 4× nylon-insert flange nuts for the seat frame/tube mounting arrangement.
Wall hardware and lock are not included. This is a complete mount-and-vehicle-hardware bundle, not a hardware-only purchase.
Vehicle Hardware: Parts 1–7
Flat support bar: Flat steel bar cut to the required length to provide added support and strength.
Rivnut: The threaded insert used in the installation.
Rivnut installation tool: Used to set the rivnut.
ARmA15 mounting bolts: Attach the ARmA15 mount to the flat support bar (#1). Loctite threadlocker is recommended on these bolts.
Lock washers: Use with the ARmA15 mounting bolts (#4). Loctite is still recommended on #4.
Frame mounting bolts: Attach the flat support bar (#1) to the seat’s tube frame.
Nylon-insert lock nuts: The nylon insert resists loosening. No Loctite or lock washers are needed or recommended on these nuts for this kit.
Loctite is not included. Wall-mount lag bolts and the wall-kit Torx bit are sold separately.
💪 Built from Plate Steel — Not Some Folded Tin Taco
The vehicle hardware changes; the core ARmA15 locking mount is the same American-built mount used in our wall kit. You get a heavy-duty steel frame, reinforced locking points, and an ABS polymer magazine block designed to protect your firearm’s finish.
ARmA15 Frame and Locking Points
Frame: 3/16-inch plate steel, approximately 0.188 inch (4.78 mm).
Locking points: 1/4-inch solid steel, 0.25 inch (6.35 mm).
Thickness comparison: the frame is approximately a stack of two U.S. quarters and a dime; the locking points are approximately four quarters.
For comparison, nominal 14-gauge mild steel is about 0.0747 inch thick and 16-gauge about 0.0598 inch. The ARmA15 frame is about 2.5 times and 3.1 times those thicknesses, respectively.
Thickness comparisons describe the material, not a guarantee that every complete installation has the same strength. Engineering comparisons depend on steel properties, geometry, loading, hardware, and the mounting surface.
Thin sheet metal may be fine for a lunchbox. Your rifle deserves more than a folded tin taco.
🚀 Quick Access Demonstration
Watch the ARmA15 go from locked to loaded in 3 seconds in our demonstration. This shows the mount’s quick-access operation; actual access time depends on your lock, placement, and practice. It is not the vehicle installation video.
🔓 Choose Your Lock — Lock Not Included
The interchangeable lock design lets you choose a compatible padlock, a quick-access lock, or a hidden-shackle puck lock. Choose the lock that suits your storage needs and confirm fit before use. The lock hole diameter is 0.44 inch (11.18 mm).
Quick-access lock: for convenient routine access.
Hidden-shackle puck lock: covers the shackle to reduce access to it.
Standard padlock: a straightforward alternative.
🔍 Firearm Compatibility
Compatible platforms: AR-15, M4, M16, Tavor SAR*, ARX-100, SCAR-16, AR-15 6.8 SPC, AR-15 .300 Blackout, AR-15 .458 SOCOM, KelTec SU16, left-handed Rock River Arms AR-15, and California featureless AR-15s.
Not compatible: left-handed Stag AR-15, SIG 556xi, AR-10, LR-308, AK-47, shotguns, or firearms that do not use an AR-15-style magazine. A compatible firearm platform does not by itself establish vehicle clearance: check your optic, sling, and other accessories.
*Tavor SAR is compatible. Tavor X95 requires a low-profile or folding cocking handle upgrade. For a fixed-magazine configuration or uncertain fit, contact ARmA15 before ordering.
🏠 One Mount, More Than One Location
The optional, separately purchased Wall Mount Hardware Kit lets you install the ARmA15 on a suitable wood stud. Its low-profile design supports vertical or horizontal wall placement in a closet, behind a jacket, or behind suitable wall art. Because a drywall screw isn’t a security plan.
The mount sits approximately 3-5/8 inches from the wall when locked. Moving it to a different vehicle requires the appropriate hardware and a fresh clearance check.
🧰 Installation and Setup
Open the Dodge installation guide for this mounting configuration. Additional installation videos and written instructions will be added there.
Confirm the vehicle kit and rear-seat mounting arrangement, then check placement and clearance.
Use the matching hardware and follow the vehicle-specific instructions. Verify what is behind any proposed hole before drilling; avoid wiring, harnesses, and other vehicle components.
Fit your compatible lock and check retention, seat movement, and access with the firearm unloaded.
This kit is intended for the rear folding seat, not a universal floor or body-panel installation. Contact us if you need a different mounting arrangement.
❓ Quick Answers
Does this price include the ARmA15 mount?
Yes. The $129.99 bundle includes the ARmA15 mount, the matching vehicle hardware and support bar. Wall hardware and a lock are purchased separately.
Which Dodge year group should I order?
Order this product for 2019 and newer trucks. The other year group uses a separate kit. Your order will identify this year range and SKU ARMA15-DODGE-2019PLUS.
$9.99 flat-rate U.S. shipping per order, with free shipping on orders over $200. The threshold uses merchandise subtotal after discounts, before tax. U.S. orders only.
Reviews
There are no reviews yet.